Advertisement
TROUBLESHOOTING
*Allow 15 minutes to pass between full drives as this will give the motors a chance
to cool down. Failure to do so could wear out and shorten the life of the engine.
SYMPTOM
Trek 4x4 does
not respond
Response to
control inputs
intermittent or
erratic
10
POSSIBLE CAUSE
1. Communication between
controller and car was not
synchronized during set up
2. Battery power depleted
on car, controller, or both.
1. Controller battery power
nearly depleted.
POTENTIAL SOLUTION
1. To synchronize, turn on car first,
place it on level ground, and then
turn on controller
2. Charge car and/or replace
batteries in controller
1. Replace batteries in controller.
Hide quick links:
Advertisement
Need help?
Do you have a question about the TREK 4X4 and is the answer not in the manual?
Questions and answers