Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Protocol ROVER GX
Summary of Contents for Protocol ROVER GX
- Page 1 ROVER GX R/C CAR WITH LIVE STREAMING CAMERA INSTRUCTION MANUAL...
- Page 3 THANK YOU. Thank you for your purchase of Protocol’s Rover GX R/C Car with Live Streaming Camera. You are about to experience the best of what remote control driving has to offer. We strongly recommend that you take the time to read this manual thoroughly. It contains many tips and instructions on how to get the most out of this vehicle and maintain it for a long life.
- Page 4 TABLE OF CONTENTS Safety & Precautions Parts Remote Battery & Phone Installation Charging the Car Start-Up Procedure Operation: Testing the Car Operation: Driving the Car Correcting Tire Alignment Troubleshooting APP Instructions & Photo/Video Replacement Parts & Limited Warranty...
- Page 5 • Never attempt to modify function of vehicle or controller or attempt • repairs using parts other than those supplied by Protocol. Spare parts are available at www.ProtocolNY.com THIS DEVICE USES COMPONENTS THAT OPERATE AT HIGH SPEEDS. AS WITH ANY SUCH DEVICE, USE CAUTION TO OPERATE SAFELY.
- Page 6 PARTS 1. On/Off Switch 2. Direction Trimmer 3. Battery Compartment 4. Camera...
- Page 7 PARTS REMOTE 1. Power Switch 2. Power Indicator 3. Trigger 4. Battery Compartment (underneath) 5. Phone Mount 6. Steering Wheel...
- Page 8 REMOTE BATTERY AND PHONE INSTALLATION INSTALLING THE BATTERIES 2 x AA Batteries Battery Cover Remove battery cover from controller. Insert 2 x ‘AA’ batteries according to indicated polarities. Replace battery cover. 1. Install batteries carefully. 2. Do not mix old and new batteries. 3.
- Page 9 CHARGING THE CAR BATTERY 1. Make sure the car is turned off. 2. Remove the battery from the battery compartment. 3. Connect the USB charging cable to the battery. 4. Plug the charger into a USB port. The USB light will turn red while charging and will turn off once fully charged.
- Page 10 START-UP PROCEDURE Before driving, the car and controller must be turned on in sequence. 1. Turn on the car. 2. Turn on the controller. 3. The power indicator on the remote will blink twice to indicate it has synced with the car. NOTE: 1.
- Page 11 OPERATION: TESTING THE CAR After turning on the car and remote, pull the trigger back slightly and the car will move forward. Push the trigger forward slightly and the car will move backward. To brake, release the trigger. Forward Pull Backward Push...
- Page 12 OPERATION: DRIVING THE CAR FIRST TIME DRIVERS!!! TAKE YOUR TIME! GO SLOW! Practice driving back and forth until you are comfortable with speed before attempting any other maneuvers. As you are driving forward or backward, follow the below maneuvers to control the car.
- Page 13 CORRECTING TIRE ALIGNMENT If the car veers to the right or left without touching the steering wheel, you can fix the alignment. Adjust the direction trimmer on the bottom of the car. For example, if the car is veering to the right, nudge the trimmer to the left. Make gradual adjustments until the car is driving straight.
- Page 14 Failure to do so could wear out and shorten the life of the engine. SYMPTOM POSSIBLE CAUSE POTENTIAL SOLUTION Rover GX does 1. Communication between 1. To synchronize, turn on car first, not respond controller and car was not...
- Page 15 “Protocol Rover GX” and download the App to your smartphone. 2. Turn on the remote control and the car. 3. Once it is turned on, Rover GX will transmit a Wi-Fi signal, “Rover GX”. Make sure your smartphone is connected to that signal.
- Page 16 REPLACEMENT PARTS Thank you for your purchase of Protocol’s Rover GX R/C Car. We know that accidents can sometimes happen and that is why we offer spare parts kits on our website: www.ProtocolNY.com. LIMITED WARRANTY At Protocol, we’re dedicated to bringing you innovative and well-designed products that make living fun and easy.
Need help?
Do you have a question about the ROVER GX and is the answer not in the manual?
Questions and answers
Can’t find the app in AppStore
The Protocol Rover GX app may no longer be available in the App Store because it has been flagged as potentially malicious or containing unwanted bundled software. The scan system determined that these flags are likely real positives, leading to its removal from the catalog.
This answer is automatically generated