Set Time Screen - Nevco MPCX Basketball Operator Instructions Manual

Set Time: DN
0:00.0
Strikes:0
Note: The following key is active only if the time is stopped.
Pressing it with time running causes the control to prompt.
Allows you to set the time (Minutes).
SET
Use the "+" or "-" keys to enter the desired number
TIME
of minutes.
Note: Hold the key down for fast advance.
Press
SET
TIME
Press
SET
TIME
Note: Press PERIOD / SCORE any time to return to the normal display.
Note: Some timers will display tenths of seconds while others display only whole seconds. In all cases the time is
divided into fractions of a second for greater accuracy. It may be possible to start and stop the time and see no
change in the displayed time even though several fractions of a second may have been counted off. The fractions of
seconds are always cleared when a new time is set.

SET TIME screen

SET TIME
This screen is for setting the time. (Timer must be stopped).
The cursor indicates the Minutes, Seconds, or Tenths of
Seconds as being selected. Use the SET TIME key to step to the
desired element of time, then, use the "+" or "-" keys to change
its value and send it to the scoreboard. (Hold down the "+" or "-
" keys for fast advance).
Note: To change the direction the timer will count, use the
OPTIONS menu.
again to set the Seconds:
Use the "+" and "-" keys to enter the
desired number of seconds.
Note: Hold the key down for fast advance.
again to set the Tenths of a Second:
Use the "+" and "-" keys to enter the
desired number of tenths of a second.
Note: Some scoreboard models may not display tenths of seconds.
7
Accessed
by
pressing
SET
TIME
Time Is Running
Stop Time To Set
Set Time: DN
0:00.0
Strikes:0
Set Time: DN
0:00.0
Set Time: DN
0:00.0