Preparations For Installation; Standard Fittings - Gree GMV-ND07T/C-T Owner's Manual

3 Preparations for Installation

Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm (inch).

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wireless controller
Paper pattern for
2
installation
Tapping screw with
3
washer
4 Washer fixing plate
5 Drain Hose Assembly
6 Special Nut
Corrugated pipe
7
8 M10 Washer
9 Insulation
10 Insulation
11 Sponge
12 Fastener
13 Locking joint bracket
14 Tapping screw
Multi Variable Air Conditioners Cassette Type Indoor Unit
Appearance
3
Q'ty Usage
1 To control the indoor unit.
1 Locate the drill hole on ceiling.
4 Fix paper pattern.
Prevent the washer from falling
4
off.
To connect with the hard PVC
1
drain pipe.
1 GMV-ND07~48T/C-T(U)
1 GMV-ND07~48T/C-T(U)
To be used together with the
10
hanger bolt for installing the unit.
1 To insulate the gas pipe.
1 To insulate the liquid pipe.
4 To insulate the drain pipe.
4 To fasten the sponge.
1 For Wiring
2 To fix the locking joint bracket.