Technical Data; Information For Test Institutes - Zanussi ZYAN8EW0 User Manual

3. If necessary, replace the defective door
gaskets. Contact the Authorised Service
Centre.
NOISES
CLICK!
BLUBB!

TECHNICAL DATA

The technical information is situated in the rating
plate on the internal side of the appliance and on
the energy label.

INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any
EcoDesign verification shall be compliant with EN
62552. Ventilation requirements, recess
dimensions and minimum rear clearances shall be
58
SSSRRR!
220~240 V
as stated in this User Manual at Chapter 3. Please
contact the manufacturer for any other further
information, including loading plans.
BRRR!
Voltage
50 Hz
HISSS!
Frequency