Technical Information; Possible Installation Options; Conformity/Manufacturer's Declaration; Imprint - Loewe bild s Series Operating Manual

 Loewe bild s | Operating manual 2
Technical information | Possible installation options
Conformity / Manufacturer's declaration | Imprint

Technical information

About the OLED screen
The TV set with OLED screen you have purcha-
sed satisfies the most rigorous quality require-
ments and has been inspected with respect to
pixel errors.
Despite of thorough care when manufacturing
the display, it cannot be 100% guaranteed that
no subpixel defects will occur due to technical
reasons.
Please understand that these types of effects, as
long as they are within the limits specified in the
standard (ISO 9241-307, fault class II), cannot
be considered as a device defect in terms of
the guarantee.
Organic Light Emitting Diodes are an image
technology based on self-luminous pixels that
offer clear benefits in terms of image quality and
performance.
Under certain conditions, persistent, one-si-
ded loads on the OLED material can result in
persistence image faults which are irreversible.
Residual image issues can arise by using static
image content over a longer period, such as sta-
tic images, subtitles or ticker displays, looping
dia-shows or video sequences, static displays
serving as presentation monitors or with video
games, black bars in some screen formats.
These residual image issues are not defects
within the meaning of the warranty.
To minimise such issues, Loewe has developed

Possible installation options

You can use the following Loewe installation
options listed for your TV set.
Do not use any installation options that are not
approved for your TV set.
Item number Name of the installation option
72730001 Loewe wall mount WM7
60805D00 Loewe table stand motor s.77
60804D00 Loewe floor stand motor s.77
a special algorithm for detecting image content.
If static images are displayed for too long, the TV
set automatically switches to a screen-friendly
contrast mode. After a new user operation, the
device immediately returns to its normal state. In
addition, menu insertions are gradually reduced
or displayed transparently after one minute.
Under normal viewing conditions, such residual
image issues do not arise.
Information about connected USB hard
drives
Switching off the TV set with the mains switch
during operation or an inadvertent disruption to
the power supply (e.g., power failure) can cause
damage to the hard disk file system and hence
loss of the recorded broadcasts.
Never ever disconnect the USB storage device
from the TV set during a copy process. Before
switching off the set with the mains switch, we
recommend you to switch it to standby mode.
If, contrary to expectation, you are still experien-
cing problems with the operation of the hard
drive, you can first carry out a test. In addition, a
formatting of the hard disk can be remedy. In the
process, however, all content on the hard disk is
deleted. You can find the corresponding menu
items underr System settings  Control 
more ...  Hard disks.
Loewe are not liable for the loss of data on the
integrated hard disk of your TV set. To avoid
Conformity /
Manufacturer's declaration
Lo e w e Te c h n o l o g y h e re by
declares that this product meets
the essential requirements and
other relevant provisions of
Directive 2014/53/EU and all applicable EU
directives.
In the frequency range 5150 to 5350 MHz, this
TV set is restricted to indoor use in the following
countries: Belgium, Bulgaria, Denmark,
Germany, Estonia, Finland, France, Greece,
Ireland, Italy, Croatia, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Austria,
Poland, Portugal, Romania, Sweden, Slovakia,
Slovenia, Spain, Czech Republic, Hungary,
United Kingdom, Cyprus.
You can find the complete declaration of
conformity in the product selection at:
www.loewe.tv/en/support
data loss, we recommend copying important
recordings to an external storage medium.
Software-Update
It is possible to update the software on your
Loewe TV set. In the software update (package
update) all the software releases in the TV set
are scanned and updated as required.
Current software versions can be downloaded
from the Loewe Internet site (see below) and
installed on your TV set using a USB stick.
If your TV set is connected to the Internet, the
TV set can be updated directly via the Internet.
For more information on the software update,
please refer to the user handbook which can
be downloaded from the Loewe Internet site.
Notes on Kinematics
The Loewe TV set is equipped with a kinematics
that moves the TV set upwards or downwards
when switching it on and off, whereby the spea-
ker cover is visible or is hidden.
Please make sure that there is no externally
applied force opposing the movement. You have
the option to fix the position of the kinematics
from the menu, or disable the function.

Imprint

Loewe Technology GmbH
Industriestraße 11
D-96317 Kronach
www.loewe.tv
Printed in Germany
Editorial date 09/20-1.0 MJ/JK/SB
© Loewe Technology GmbH, Kronach
The information in this document is subject to
change without notice and does not constitute
any obligation on the part of Loewe Technology
GmbH.
All rights including translation, technical modi-
fications and errors reserved.
17