Installing the Client Manager
You must install the Client Manager in every PC that will be connected to the Internet. Install the Client
Manager by the following procedure.
There is no need to install the Client Manager for the Ethernet LAN PCs.
1
Insert the AirStation Series Driver CD in the CD-ROM drive.
2
Click the Start button, and select Run....
3
4
5
6
7
Enter D:\WLEASY.EXE (where D is the CD-
ROM drive) and click the OK button.
Select Installation the Client Manager and
click the Next button.
Exit all other applications that are open and click
the OK button.
Click the Next button.
Check the installation destination directory. If
you do not need to change the destination direc-
tory, click the Next button. To change the desti-
nation
directory,
enter
destination directory and its drive. Then click the
Next button.
WLAR-L11-L Internet Connection Manual
the
installation
49