Installing the Client Manager
You must install the Client Manager on every PCs that will connect to the Internet through the AirStation.
Install the Client Manager by the following procedure.
There is no need to install the Client Manager for the Ethernet LAN PC.
1
Insert the AirStation Series Driver CD in the CD-ROM drive.
2
Click the Start button, and select Run....
3
4
5
6
7
Enter D:\WLEASY.EXE (where D is the CD-
ROM drive), and click the OK button.
Select Installation the Client Manager, and
click the Next button.
Exit all other applications that are open, and
click the OK button.
Click the Next button.
Check the installation destination directory. If
you do not need to change the destination direc-
tory, click the Next button. To change the desti-
nation directory, enter the installation destination
directory and its drive and then click the Next
button.
WLAR-L11-L Internet Connection Manual
Continue to next page.
21