Motorola APX MOBILE O7 Quick Reference Manual page 2

O7CH_QR-Card.book Page 3 Tuesday, September 3, 2013 12:42 PM
m
®
ASTRO APX™
O7 Control Head Mobile Radio
Quick Reference Card
RF Energy Exposure and Product Safety Guide for
Mobile Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before
using the radio, read the RF Energy Exposure and
Product Safety Guide for Mobile Two-Way Radios which
contains important operating instructions for safe usage
and RF energy awareness and control for Compliance
with applicable standards and Regulations.
Radio Controls
Multi-function Knob (MFK)*
Power Button
DTMF Keypad
LED Indicators
Dim Button
Home Button
4-Way Navigation Buttons
Menu Select Buttons*
Accessory Port (Microphone)
*These controls/buttons are programmable.
Radio On/Off
Press the Power button to toggle the power on or off.
Adjusting Volume
If volume is set as the primary mode,
1
Turn the MFK clockwise to increase volume or
counterclockwise to decrease the volume.
If volume is not set as the primary mode, press the MFK
once and repeat step 1.
Selecting a Zone
If channel is set as the primary mode,
1
Turn the MFK until the display shows the desired
channel and press the PTT button to begin
transmitting on the displayed zone.
If channel is not set as the primary mode, press the MFK
once and repeat step 1.
OR
> <
2
or to Zone and press the Menu Select button
Emergency directly below Zone.
Button*
D U
3
or until the desired zone is displayed.
4
Press the Menu Select button directly below Sel or
the  button (on the keypad mic.) to confirm the
selected zone number.
5
Press the PTT button to begin transmitting on the
displayed zone.
Selecting a Channel
Data Button
If channel is set as the primary mode,
1
Turn the MFK until the display shows the desired
channel and press the PTT button to begin
transmitting on the displayed channel.
If channel is not set as the primary mode, press the MFK
once and repeat step 1.
OR
>
2
Press and hold to scroll to Chan and press the
Menu Select button directly below Chan.
D U
3
or or rotate the MFK knob to the desired
channel.
4
Press the Menu Select button directly below Sel or
the  button (on the keypad mic.) to confirm the
selected channel number.
5
Press the PTT button to transmit on the displayed
channel.
Receiving and Transmitting
1
Take the microphone off hook.
2
Select zone/channel.
3
Listen for a transmission.
OR
> <
or to Mon then press the Menu Select button
directly below Mon and listen for activity.
4
Adjust volume, if necessary.
5
Press the PTT button to transmit; release to receive.
Sending an Emergency Alarm
1
Press the Emergency button. A tone sounds and the
display alternates Emergency and the home display.
2
A dispatcher acknowledgment Ack received display
follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system's central controller.
3
Press and hold the emergency button or the PTT
button to return to normal operation.
To exit emergency at any time, press and hold the
Emergency button.
English