Page 1
CD-BK3200V CD-BK3200V CP-BK3200 CD-BK3200V Video CD Mini System consisting of CD-BK3200V (main unit) and CP-BK3200 (speaker system). VIDEO CD MINI SYSTEM MODEL CD-BK3200V OPERATION MANUAL NTSC/PAL ENGLISH Please refer to pages E-1 to E-44. CD-BK3200V(FRONT) 01.7.19, 10:07...
ENGLISH Introduction Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Contents Page Page ! Important Instruction ! CD Playback Accessories .
Accessories CD-BK3200V Please confirm that the following accessories are included. Remote control 1 "AA" size battery (UM/SUM-3, AM loop aerial 1 FM aerial 1 Video cable 1 R6, HP-7 or similar) 2 Note: Only the above accessories are included. Special Notes...
The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible Correct for any damage resulting from use of this unit with a voltage other than that which is specified.
System Connections FM aerial AM loop aerial Transport screw Left speaker Right speaker Wall socket (See page 10.) ENGLISH 01/5/30 CD-BK3200V(S)1.fm...
Page 9
CD-BK3200V ! Removing the transport screw ! Speaker connection Before turning the power on, be sure to remove the transport screw on Main terminals: the back of the unit using a flat-blade screwdriver or a coin. Connect the lower black wire to the MAIN (-) terminal and the blue wire to the MAIN (+) terminal.
Page 10
VCR with a video input, which in turn should be connected to the TV/monitor through the TV ANTENNA/CABLE input. (Be sure to turn on the VCR, and set the VCR's input mode to "auxiliary".) ENGLISH 01/5/30 CD-BK3200V(S)1.fm...
Page 11
CD-BK3200V ! Setting the AC voltage selector ! Setting the FM/AM span selector Check the setting of the AC voltage selector located on the rear panel before plug- ging the unit into a wall socket. If necessary, adjust the selector to correspond to the AC power voltage used in your area.
" Exposing the sensor on the unit to strong light may interfere with operation. Change the lighting or the direction of the unit. " Keep the remote control away from moisture, heat, shock, and vibrations. E-11 ENGLISH 01/5/30 CD-BK3200V(S)2.fm...
General Control CD-BK3200V ! Demonstration mode The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button.
(EQUALIZER MODE) button repeatedly until the desired sound mode appears. The sound is not modified. Bass and treble are emphasised. Bass and treble are slightly emphasised. Treble is cut a little. Treble is reduced a lot. Vocals (midrange tones) are emphasised. E-13 ENGLISH 01/5/30 CD-BK3200V(S)2.fm...
Setting the Clock CD-BK3200V Press the TUNING/TIME ( or ) button to adjust the hour and then press the MEMORY/SET button. " Press the TUNING/TIME ( ) button once to advance the time by 1 hour. Hold it down to advance continuously.
Digital (max. 20 min) Digital (max. 74 min) " Video CDs are recorded in PAL or NTSC format. " Analogue system CDVs (12 cm) cannot be played. Video recording format MPEG 1 " Photo CDs and CD-ROMs cannot be played. E-15 ENGLISH 01/5/30 CD-BK3200V(S)2.fm...
Preparation for Video CD Playback CD-BK3200V ! Adjusting the TV and VCR ! Selecting the video output format The TV and VCR input varies according to connection method. Be sure to make the Video CD is recorded in PAL or NTSC format.
Press the direct play button ( 1 - 6 ) of the <TV screen> tray with the video CD. A menu will appear on the TV and playback will be paused. E-17 ENGLISH Sound Control (See page 13.) 01/5/30 CD-BK3200V(S)2.fm...
Page 19
CD-BK3200V ! To move the menu screen (menu screen Select the desired menu number using the direct search buttons with more than 1 page) on the remote control. " Playback will begin. To move to the next menu screen: " After playback has finished, the menu will reappear. Select the menu number Whilst in the stop mode, press the button.
CD will be played. Note: The system will search disc trays until it finds a video CD and will not search the rest of the trays. E-19 ENGLISH Sound Control (See page 13.) 01/5/30 CD-BK3200V(S)2.fm...
Page 21
CD-BK3200V To interrupt playback: ! Scan play Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. For fast forward: Press and hold down the button To stop playback: during playback. Press the ( /RETURN) button.
! After performing repeat or random play, be sure to press the ( /RETURN) but- ! During random play, this operation is disabled. ton. Otherwise, the disc(s) will play continuously. ! During P.B.C. play, repeat or random play is not possible. E-21 ENGLISH 01/5/30 CD-BK3200V(S)3.fm...
Programmed Play CD-BK3200V Up to 32 tracks can be programmed. Press the MEMORY/SET (MEMO- RY) button to save the track num- ber. Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro- grammed. Press the ( /RETURN) button.
To cancel the disc digest: Press the ( /RETURN) button. Notes: ! The disc digest function is available only in the stop mode. ! This function is not available with an audio CD. E-23 ENGLISH 01/5/30 CD-BK3200V(S)3.fm...
Time Search Selection CD-BK3200V You can play back from the desired scene by specifying the time. " Track digest selection Each track is divided into 9 sections. Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME You can look at the sections and select the scene you want to start watching from.
! If more than 9 bookmarks are created, bookmarks will be erased in the order ! This function is invalid with still pictures (menu display, photo, etc.) and audio CD. they were created. ! Every marked scene will be erased automatically when the programme is memorised. E-25 ENGLISH 01/5/30 CD-BK3200V(S)3.fm...
Resume Play Changing the TV Screen Dis- CD-BK3200V play This function is to restart playback from the point where it has stopped. During the stop mode, hold down the /SELECT/RESUME) but- You can check the operation of the main unit by the on-screen display.
! When there is no CD in one of the disc tray 1 - 6 positions, that position will be skipped and the next CD will be played. Note: The system will search CD trays until it finds a CD and will not search the rest of the trays. E-27 ENGLISH Sound Control (See page 13.) 01/5/30 CD-BK3200V(S)3.fm...
Page 29
CD-BK3200V To interrupt playback: " To locate the beginning of a track Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. To move to the beginning of the next track: Press the button for less than 0.5 seconds during playback.
Due to the structure of its disc information, it takes longer to read an MP3 disc than a normal CD (approximately 20 to 90 seconds). E-29 ENGLISH Sound Control (See page 13.) 01/5/30 CD-BK3200V(S)3.fm...
Listening to the Radio CD-BK3200V Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING/TIME ( ) button to tune in to the desired station.
When a new station is stored in memory, the station previously memorised will be erased. Note: The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. E-31 ENGLISH Listening to the Radio (See page 30.) 01/5/30 CD-BK3200V(S)4.fm...
Listening to a Cassette Tape (TAPE 1) CD-BK3200V Before playback: Press the ON/STAND-BY button to turn the power on. " For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended.) Press the TAPE (1 2) button to select TAPE 1.
" If a power failure occurs during tape operation, the tape head will remain engaged Press the TAPE (1 2) button to select TAPE 2. with the tape and the cassette door will not open. Wait until the power is restored. E-33 ENGLISH Sound Control (See page 13.) 01/5/30 CD-BK3200V(S)4.fm...
Playing Karaoke CD-BK3200V You can enjoy karaoke to video CDs, CDs, MP3 Discs, radio, cassettes, and other Set the MIC LEVEL control to MIN to protect the speakers from external devices by connecting a separately available microphone to this unit.
Page 36
R-CH V-CANCEL STEREO Sounds on the left and right channels are played. L-CH Sounds on the left channel only are played. R-CH Sounds on the right channel only are played. V-CANCEL The main vocal is lowered. E-35 ENGLISH 01/5/30 CD-BK3200V(S)4.fm...
Tune in to the desired station. (See page 30.) " SHARP is not liable for damage or loss of your recording arising from malfunction of this unit. Load a cassette into the TAPE 2 cassette compartment with side A "...
If the recording side is switched from side A to B during recording, the system will record the interrupted track on side B from its beginning. The recording will be made without cutting the beginning of the track on side B. E-37 ENGLISH Programmed Play (See page 22.) 01/5/30 CD-BK3200V(S)4.fm...
Dubbing from Tape to Tape CD-BK3200V You can record from TAPE 1 to TAPE 2. For recording, use only normal tapes. Do not use metal or CrO tapes. Press the ON/STAND-BY button to turn the power on. Load a prerecorded cassette into the TAPE 1 cassette compart- ment.
For timer playback For timer recording Press the TUNING/TIME ( or ) button to specify the hour to start, then press the MEMORY/SET button. The illustrations show the timer playback setting. E-39 ENGLISH Setting the Clock (See page 14.) 01/5/30 CD-BK3200V(S)4.fm...
Page 41
CD-BK3200V ! Sleep operation Press the TUNING/TIME ( ) button to specify the minutes, then press the MEMORY/SET button. Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis- played. The unit will enter the timer stand-by mode automatically.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms. " Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME control. E-41 ENGLISH 01/5/30 CD-BK3200V(S)4.fm...
If something is wrong with this product, check the following before calling your autho- Symptom Possible cause rised SHARP dealer or service centre. " Radio makes unusual noise con- " Is the unit placed near the TV or comput- secutively.
"GOOD-BYE" is displayed. When "GOOD-BYE" disappears, unplug the AC power lead from the wall socket. Insert the transport screw into the back of the unit and tighten it with a flat-blade screw- driver or a coin. E-43 ENGLISH 01/5/30 CD-BK3200V(S)4.fm...
Specifications CD-BK3200V ! CD player As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
Page 49
This file has been downloaded from: www.UsersManualGuide.com User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual Downloaded from:...