Using The Ndis 2.01 Driver With Windows 95 - Dell Precision 410 User Manual

Using the NDIS 2.01 Driver With Windows 95

To install the NDIS 2.01 NIC driver in systems running
Dell-installed Windows 95 Service Release 2 or a Win-
dows 95 operating system not installed by Dell, perform
the following steps:
1. Install the Windows 95 NIC driver.
For instructions, see the appropriate instructions for
your Windows 95 operating system found earlier in
this chapter.
2. Start the Windows 95 operating system.
3. Click the Start button, point to Settings, and click
the Control Panel. Then double-click the Network
icon.
4. In the Network window, select 3Com Fast Ether-
Link XL 10/100Mb TX Ethernet Adapter, and
then click Properties.
5. Select Real Mode (16bit) NDIS driver, and click
OK to return to the Network window.
6. Click OK, and then click Yes to restart your
system.
Using the Network Interface Controller 5-5