Important Instructions - Sharp 28LW-92H Operation Manual

Hide thumbs Also See for 28LW-92H:
Table of Contents

Advertisement

Important Instructions

For your own safety read following instruction carefully before attempting to connect this unit to the mains
supply.
IMPORTANT
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the
letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter L or coloured red.
No connection is to be made to the earth terminal of the plug.
If a 13 Amp (BS 1363) Plug is used a 5 Amp Fuse must be fitted, or if any other type of Plug is
used a 5 Amp Fuse must be fitted, either in the Plug of Adaptor, or on the Distribution Board.
CAUTION
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING COVER. NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT ALLOW
THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.
Downloaded from:
http://www.usersmanualguide.com/
MAINS (AC) OPERATION
The wires in this mains lead are coloured in accordance with the following code :
BLUE-NEUTRAL
BROWN-LIVE
- 27 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

32lw-92h

Table of Contents