Pedigo P-2140 Operator's Manual page 30

M
AINTENANCE
Yearly cleaning
procedure
Result
30
Continued from previous page
To clean the warmer yearly, do the following.
Step Action
1. Make sure that the warmer is disconnected from electric power and cool.
Remove
2. the shelves, baskets, and support assembly from the interior of the
warmer.
Clean
3. the shelves, baskets, support assembly and interior with a damp cloth.
4. Dry the interior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
5. Clean each side of the window pane with glass cleaner or distilled vinegar.
Re-install
6. the shelves, baskets, and support assembly.
The warmer is now clean.
WARNING:
Personal injury hazard.
The blankets may overheat if the shelves and support
assembly are not in place. Make sure to re-install the
shelves and support assembly before operating the
warmer.
C om b i n at i on W a rm e r Op er a to r ' s Ma n u al
▪
EC-TS-011853
M N- 47 3 2 0 Rev 1 1/ 2 1
▪ ▪ ▪