Settings - AEG FEB52600ZM User Manual

5.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the
quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
3) In accordance with the 1016/2010 regulation.
4) In accordance with the 2019/2022 regulation.
5.2 Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to EN60436), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided
with your appliance.

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
Water
1) 2)
(l)
3)
9.9 / 9.9
9 - 12.8
11.1 - 13.6
9.2 - 11.2
10.5 - 12.8
Energy
(kWh)
4) 3)
0.920 / 0.936
0.694 - 1.223
1.052 - 1.285
0.556 - 0.680
0.792 - 0.968
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
is on and the display shows the
programme duration.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold simultaneously Delay
and Option until the appliance is in
programme selection mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
ENGLISH
Duration
(min)
4) 3)
237 / 227
120 - 170
160
30
105
9
4)