Lightmaxx Quad Star HP LED User Manual page 21

Operating:
Start:
Connect the device to the mains and wait a few seconds for it to be ready for use.
Menu:
Navigation in the menu is done via the four menu buttons below the display. With the „Menu"
button you activate the menu, the navigation is done via the „Up" and „Down" buttons. A corres-
ponding selection is confi rmed with the „Enter" key.
The menu structure in detail:
Su00-S99
Press the MODE button until the above appears on the display.
This sets the SOUND to LIGHT function.
Press the SET UP button to confi rm your setting.
Su00: SOUND to LIGHT deactivated!
The Quad Star HP runs in automatic mode.
Su01-99: Via UP/DOWN you can adjust the sensitivity of the internal microphone!
The Quad Star HP will now run SOUND to LIGHT.
Auto
Press the MODE button repeatedly until the above appears on the display. This sets the
AUTOMATIC OPERATION Function on.
Slave
Press the MODE button repeatedly until the above appears on the display. This sets the
MASTER/SLAVE function.
A001
Press the MODE button repeatedly until the above appears on the display. This sets the DMX
function.
Use the UP/DOWN buttons to set the DMX start address. Press the SET UP key to confi rm your
setting.
21