Synology Ds1621+ At A Glance - Synology DS1621+ Hardware Installation Manual

Synology DS1621+ at a Glance

1 2
No. Article Name
1
Status Indicator
2 Alert Indicator
3
Power Button
4 LAN Indicator
5 Drive Status Indicator
6 Drive Tray
7 USB 3.0 Port
8 Drive Tray Lock
9 Power Port
10
Fan
PCI Express
11
Expansion Slot
12 Kensington Security Slot
13 USB 3.0 Port
14 LAN Port
15
RESET Button
16 eSATA Port
1
For more information about Synology Expansion Unit supported by your Synology NAS, please visit www.synology.com.
4 Chapter 1: Before You Start
3 4 5
12
6 7 8
Location
Displays the status of the system. For more information, see
"LED Indicator Table".
Displays warnings regarding fan or temperature. For more
information, see "LED Indicator Table".
1. Press to power on your Synology NAS.
2. To power off your Synology NAS, press and hold until you
hear a beep sound and the Power LED starts blinking.
Displays the status of the network connection. For more
Front
information, see "LED Indicator Table".
Displays the status of each drive. For more information, see
"LED Indicator Table".
Install drives (hard disk drives or solid state drives) here.
Connect external drives or other USB devices to the Synology
NAS here.
Lock or unlock drive trays.
Connect power cord here.
Disposes of excess heat and cools the system. If the fan
malfunctions, the Synology NAS will emit a beeping sound.
Supports one PCIe x8 slots (x4 link) add-on card.
Attach a Kensington security lock here.
Connect external drives or other USB devices to the Synology
NAS here.
Rear
Connect RJ-45 network cable here.
1. Press and hold until you hear a beep sound to restore
the IP address, DNS server, and password for the admin
account to default.
2. Press and hold until you hear a beep, then press and hold
again until you hear three beeps to return the Synology
NAS to "Not Installed" status so that DiskStation Manager
(DSM) can be reinstalled.
Connect Synology Expansion Unit
9
10
13 14 15 16
Description
1
to the Synology NAS here.
11