Page 1
User Manual Version 1.1 2018/02 APM-22 Touch LCD Monitor...
Page 2
TES reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of TES to notify any person of such revisions or changes.
Page 3
FCC/ IC Statement This device complies with Part 15 of the FCC Rules and Canadian ICES-003/NMB-003 regulation. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 4
Usage Notice Warning - To prevent the risk of fire or shock hazards, and do not expose the product to moisture. Warning - Please do not open or disassemble the product as this may cause electric shock. Precautions Please follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
The APM-22 series is a 22” touchscreen monitor that builds to withstand commercial grade open frame monitor, with stylish thin cable management bracket and versatile design APM-22 is an exceptional choice for applications for all business sectors and well suited for point-of-sales, point-of-information, point-of-service and interactive signage.
1.5 Interface Connectors 1.5.1 Power Connector The AC/DC converter shall have an IEC320 type male power receptacle for connection to AC mains power. The power cord, exact type to be supplied in the appropriate Option Kit, shall be length of 1.8 ± 0.05 meters, and PC99 compliant. 1.5.2 Video Signal Connector The video signal input via D-type 15-pin female connector.
Page 10
Signal Signal ML_Lane 0(p) Data0 + Signal ground Signal ground ML_Lane 3(n) Data3 - ML_Lane 0(n) Data0 - Signal ground ML_Lane 1(p) Data1 + Signal ground AUX_CH(p) AUX + Signal for Signal ground Auxiliary Channel ML_Lane 1(n) Data1 - Signal ground AUX_CH(n) AUX - Signal for ML_Lane 2(p) Data2 + Auxiliary Channel...
This product is intended to be supplied by a Listed Power Adapter or DC power source, rated 12Vdc, 2.0A minimum, Tma = 40 degree C minimum, and the altitude of operation = 3048m minimum. If it needs further assistance with purchasing the power source, please contact to TES for further information.
2.1 About VESA Mount The APM-22 series conform to the “VESA Flat Display Mounting Interface Standard” which defines a physical mounting interface for touch monitor and corresponding with the standards of touch monitor mounting devices. The VESA mount is located on the back of this unit.
2.2 About Wall Mount The APM-22 series support wall mount and this monitor can be mounted to the wooden or concrete wall with 16 screws and four bracket set on the opposites. 2.2.1 Landscape Depending on your mounting scheme, alternately, you may use the side brackets to mount your displays onto your wall or device.
2.2.3 Face Up. Step1: To install bracket on customer’s cabinet. Back side Step2: Assembly APM-22 into the cabinet and insert screws. Back side Front side...
2.3 On-Screen Display OSD Key Menu off status Menu on status Menu appear Menu disappear/ return to main item ▲ Brightness Main item select up/ Adjust up ▼ Contrast Main item select down/ Adjust down Enter/Select sub-item function Power On/Off Press the “MENU”...
Page 18
When the "UP" or "Down" button is released, the previous setting will be saved and exit the “Lock/Unlock” menu automatically. To Unlock the OSD / Power menu buttons, please follow the instructions below.(Please note: the monitor has to be turned ON with a valid signal pre-set)Press and hold the “Menu” key then Press the “Power”...
2.3.1 OSD Function Description ITEM CONTENT Default Contrast The monitor luminance level control. Brightness The monitor backlight level control. Auto Adjust Fine-tune the image to full screen automatically. Left/Right Moving screen image horizontal position to left or right. Up/Down Moving screen image vertical position to up or down. Horizontal The screen image horizontal dot clock adjustment.
2.3.3 EDID Data DP/HDMI The monitor assembly shall provide a display communications channel that conforms to VESA DDC2B hardware requirements. This configuration shall contain the 256-byte EDID file as specified by VESA EDID Standard. The monitor assembly shall provide a display communications channel that conforms to VESA DDC2B hardware requirements.
Page 25
Declaration of the Presence Condition of the Restricted Substances Marking 設備名稱:觸控螢幕 型號(型式):APM-22 Type designation (Type) :APM-22 Equipment name:Touch LCD Monitor 限用物質及其化學符號 Restricted substances and its chemical symbols 單元 Unit 六價鉻 多溴聯苯 多溴二苯醚 鉛 汞 鎘 Cadmium Hexavalent Polybrominated Polybrominated Lead...
Need help?
Do you have a question about the APM-22 and is the answer not in the manual?
Questions and answers