Install The Touch Pad Driver (Windows 2000) - Dell Inspiron 5000 Reference And Troubleshooting Manual

support.dell.com

Install the Touch Pad Driver (Windows 2000)

The touch pad driver controls touch pad and mouse functions.
NOTE: When you are prompted to select a directory, Dell recommends using the
default directory settings.
1. Save and close any open files, and exit any open application programs.
2. Insert the System Software CD into the CD-ROM or DVD-ROM drive.
3. Click the Start button, and then click Run.
4. In the Run dialog box, type x:\win2000\touchpad\english\setup.exe,
where x is the CD-ROM or DVD-ROM drive letter.
The WinZip Self-Extractor window appears.
If you are using a Japanese-language version of Windows, type
x:\win2000\touchpad\japanese\setup.exe, where x is the CD-ROM or
DVD-ROM drive letter.
The CD-ROM or DVD-ROM drive letter is usually D.
NOTICE: Do not install the Japanese-language driver on a computer
with a non-Japanese-language operating system.
5. Click Unzip.
6. Click OK.
7 . In the Welcome window, click Next>.
8. At the Important Information window, click Next> twice.
9. At the Start Copying Files window, click Next>.
The touch pad driver is copied to your hard-disk drive.
10. At the Setup Complete window, be sure that the Y es, I want to restart my
computer now button is selected, and then click Finish.
NOTE: If the computer is set to boot from the CD-ROM or DVD-ROM drive
before the hard-disk drive, remove the System Software CD before the computer
restarts so that the computer does not boot from the CD. For information on
changing the boot sequence, refer to Appendix B, "Using the System Setup
Program."
The Information about your Touch Pad window appears. If you do not want this
window to appear each time you start the computer, uncheck the box that says
Show this message the next time Windows starts. Then click Close.
Installing System Software 3-13