Buffalo TeraStation HD-HTGL/R5 User Manual page 23

18. UPS interface – An Uninterruptable Power
Supply can use this interface to safely shut
down your TeraStation in the event of a power
failure. This interface is non-LPS. DP-1, DP-1P,
DP-2, or DP-2P cables may be used to connect
to the UPS.
19. 10/100/100 Mbps Ethernet Port – Use
this port to connect your TeraStation to a
switch, a router, or another computer. The
port is autosensing, so either a conventional
Ethernet cable or a crossover Ethernet cable
may be used.
20. USB Ports – TeraStation offers four USB 2.0/1.1 ports for adding external drives or USB
printers. Please see the TeraStation Expansion section on page 0 to learn more about using
TeraStation's USB Ports.
TeraStation Diagram