Summary of Contents for Buffalo DriveStation HD-HCU2
Page 1
User Guide HD-HCU2 DriveStation Package contents: • Main Unit (DriveStation) • Power Adapter • USB Cable • DriveNavigator Installation CD • User Guides www.buffalotech.com v1.5...
Page 2
DriveStation Setup Flip the power switch on the back of DriveStation to the OFF position. Plug DriveStation’s power cord into a power outlet. Then, connect the included USB cable into the USB port on the back of DriveStation. Connect the USB cable into the USB port on the computer or device you are adding the DriveStation to.
Page 3
DriveStation Setup Flip the power switch on the back of the DriveStation to the ON position. In Windows 2000 and XP, the DriveStation will automatically install upon power- Open My Computer and the new drive will be present. By default it will use the first available drive letter and will be named ‘Local Disk’.
Other Utilities The DriveStation includes several optional utilities. To install and use these utilities, insert the CD-ROM that came with your DriveStation into a Windows PC. The DriveStation Setup Wizard quickly guides you through the cabling and power-up process for the DriveStation. Memeo AutoBackup software is available for backing up documents, multimedia files, and other files from your Windows PC to the DriveStation.
Page 5
DriveStation Setup Using DriveStation with LinkStation Flip the power switch on the back of the DriveStation to the ON position. Please refer to the User Manual on the LinkStation’s LinkNavigator CD for LinkStation USB Disk configuration.
Troubleshooting The following is a list of common issues with the DriveStation. Following each issue are possible resolutions. I see the DriveStation in My Computer but I cannot access it. The drive requires formatting. Try using the Disk Formatter Utility on the DriveNavigator CD-ROM. Consult the manual for the Disk Formatter Utility for more help.