Yealink SIP-T42U Configuration Manual page 7

REQUIRED FIELDS:
Account Active
Make sure that the On radio box is selected.
Register Name
Enter the PBXware Extension number. Example: 1003
User Name
Usually refers to the same number as the Phone Number.
Password
The Secret of the Extension as received in the e-mail associated with this Extension.
Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created
Extension.
Sip Server
Enter the Hostname or IP Address of PBXware.
- Example of a Hostname: voip.bicomsystems.com
- Example of an IP Address: 192.168.1.10
Click the Confirm button.
You will have to wait some time for the device to reboot. If everything is done as described
above, you should have successfully registered your phone to PBXware.
Dial *123 to verify registration.
DNS SRV
This section describes how to use a DNS SRV record which specifies the location of PBXware.
NOTE: Your DNS Server needs to be configured correctly in order for this to work. Bicom
Systems can provide service to set up this for you.
Log in to the phone's web administration interface
Open a new browser window and enter your phone IP address in order to access the phone's
web administration interface login screen. Example: http://192.168.1.22
Log in to the phone's web administration interface with your username and password. Please
note that the factory default login details are as follows: username is admin and password is
admin.