Advertisement
Quick Links
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and insert into the assembled stand. Make sure the
pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.
7. Insert green label extension cord into adapter and adapter insert into the wall outlet. (See Fig. B), your entire tree should now be lit.
If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or
replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to
the right, one to the left and one at the center of the main stem. (See Fig. C)
Fig. C
Top view
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any
gaps. Your Christmas tree is now complete and ready to be decorated.
MODEL #:TG76M4E28D01
1-888-919-0070
OR
Polygroup®!
Tree top
Section 2
Section 1
Side view
SKU: 741-668
Carefully follow the instructions below on how to quickly
*Electrical Rating Of Power Adapter
(For Indoor Use Only)
Input: 100V-240V, 50/60Hz, 0.35A
Output: 29V DC 0.45A
Insert Red Label
Plugs Into Red
Labeled Extension Cord
Control box
Insert Green
Label Extension
Cord into Adapter
1
Unfold the legs and lay the
stand in a flat area. Then slide
the locking disc downward and
snap into place.
Adapter
To Be Plugged
Into Wall
Outlet
Advertisement
Related Manuals for Polygroup TG76M4E28D01
Summary of Contents for Polygroup TG76M4E28D01
- Page 1 9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. MODEL #:TG76M4E28D01 SKU: 741-668...
- Page 2 STORAGE INSTRUCTIONS 1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord with adapter from the wall outlet and then disconnect light extension cord between each section of the tree. 2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole.
- Page 3 WARNING 1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste. 2. Ensure the batteries are installed correctly with regard to polarity (+ and -). 3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children. Ingestion of such batteries has been known to cause death.
Need help?
Do you have a question about the TG76M4E28D01 and is the answer not in the manual?
Questions and answers