Installation - Aquacal GBB Installation Manual

1 - Installation

WARNING
Installation of this equipment by anyone other than a qualified installer can result in a safety hazard.
l
The information contained throughout the "Installation" section is intended for use by qualified installation
l
technicians familiar with the swimming Pool/Spa safety standards.
NOTICE
Failure to protect equipment against corrosive conditions will adversely affect the life of the equipment and will
l
void equipment warranty.
Failure to heed the following may result in injury or death.
Failure to heed the following may result in damage to equipment.
IN THIS SECTION:
1.1 Positioning Equipment
1.2 Clearances
1.3 Dimensions
1.4 Plumbing
1.4.a Plumbing Requirements
1.4.b Plumbing Diagrams
1.4.c Water Connections to Heat Pump
1.4.d In-Line Chlorine Feeders
1.4.e Water Flow Rates
1.4.f Adjusting Water Flow Using ΔT (Delta-T)
1.4.g Maintaining Ability to Winterize
1.4.h Adjusting Water Pressure Switch
1.5 Electrical
1.5.a Electrical Requirements
1.5.b Access Panels
1.5.c Verifying Transformer Setting
1.5.d Three-Phase Adjustment
1.5.e Schematic Location
1.6 External Equipment
1.6.a Connecting a Call Flex
1.6.b Connecting External Controllers to Heat Pump
1.6.c Connecting Gas Backup Heater to Heat Pump
1.6.d Connecting Multiple Heat Pumps (Master / Slaved)
1.6.e Connecting a Pool/Spa Switching Relay
1.7 Program Heat Pump for the Customer
1.7.a Setting Date and Time
1.7.b Setting Time and Date Format
1.7.c Selecting Celsius or Fahrenheit
1.7.d Setting Entry Code Option
1.7.e Using Entry Code to Access Heat Pump
1.7.f Resetting Factory Defaults
1.8 Cleaning Equipment After Installation
4
5
5
6
6
7
10
10
11
12
13
13
14
14
17
17
18
19
20
20
22
29
34
40
43
43
44
47
48
50
50
52
Page - 3