Making Selections In The Icu; Adding A Listed Card; Figure 3-1. Icu Window; Table 3-1. Icu Keys - Dell OptiPlex GXi Reference And Installation Manual

•
To redisplay the last message you received from the
ICU, you can select
Help menu.

Making Selections in the ICU

The ICU window is the main window of the utility and
the starting point for making any changes to your expan-
sion-card configuration. This window displays a list of all
non-Plug and Play ISA, Plug and Play, and PCI expan-
sion cards currently installed in the computer. The ICU
window contains menus and a tool bar, as shown in Fig-
ure 3-1. When you choose a course of action, the ICU
displays dialog boxes to guide you through the various
steps.

Figure 3-1. ICU Window

You can maneuver through each menu and dialog box
using a mouse. If a mouse is not available, you can use
the keys shown in Table 3-1.
Each menu and menu option has an underlined character
in its name; when you press the <
with the key for the underlined character, that menu or
menu option is selected.
.
3-4 Dell OptiPlex GXi Midsize Systems Reference and Installation Guide
PREVIOUS MESSAGE
from the
> key in conjunction
ALT

Table 3-1. ICU Keys

Keys Action
x
< >< ><y> Displays the menu containing
ALT
the underlined letter x and
performs the operation indi-
cated by the menu item
containing the underlined let-
ter y. For example, to save a
file (that is, to display the File
menu and select the
menu option), press
<
ALT
< > Moves from one control
TAB
button or list to another.
Up- and Moves up and down through
down-arrow items in a list.
keys
< > Highlights an item in a list.
SPACEBAR
< > Selects the highlighted button
ENTER
or item in a list.
A
dding a Listed Card
NOTE: If you want to add a configuration file that you
received on diskette with a new expansion card, you must
copy the configuration file to the \db subdirectory on the
backup copy of the ICU diskette. You should then reboot
your system and perform the following procedure to add
the expansion card.
Use the following procedure to add a listed card with the
ICU:
1. Start the ICU as described in "Starting the ICU"
found earlier in this chapter.
2. From the ICU window, click Add or select
CARD
from the Configure menu.
SAVE
><f> and <s>.
ADD