Windows For Workgroups Nic - Dell OptiPlex GXa Reference And Installation Manual

9. When the operating system has finished copying
files from the NIC driver diskette 3, click Close in
the Windows Welcome screen. Then click Close in
the Network window.
10. If you are prompted, enter information about
your specific network.
See your system administrator for information.
11. Click Yes in the Network Settings Change win-
dow to restart your system.
Windows NT 3.5 x NIC
To connect your system to and configure it for use on an
Ethernet network, you must complete the following
steps:
1. Use the Program Diskette Maker (located in the
Dell Accessories program group) to make a dis-
kette copy of the NIC drivers installed on your
hard-disk drive.
2. Connect the network cable to the back of your
computer.
See "Network Cable Requirements" found earlier in
this chapter for detailed instructions.
3. Verify that the NIC is enabled in the System
Setup program.
See Chapter 2, "Using the System Setup Program,"
for more information.
4. Start the Windows NT operating system, and log
in as user Administrator or as a user with Admin-
istrator privileges.
For information on administrative users and privi-
leges, see your Windows NT documentation.
5. Double-click the Program Manager, double-click
the Main group, and then double-click the Con-
trol Panel icon.
6. From the Control Panel, double-click the Net-
work icon.
The Network Settings window appears.
7. From the Installed Adapters group, select the
existing 3Com driver and click Remove.
4-4 Dell OptiPlex GXa Midsize Systems Reference and Installation Guide
8. Click Yes in the Network Settings dialog box.
9. Click Add Adapter in the Network Settings win-
dow. Then scroll to <Other> Requires Disk From
Manufacturer, and click Continue.
10. Insert the NIC driver diskette 1 into drive A, type
a:\, and then click OK.
The Select OEM Option dialog box appears.
11. Select 3Com Fast EtherLink XL NIC (3C905) for
the 10/100-Mbps NIC, and then click OK.
12. When prompted, remove the NIC driver
diskette 1 from the diskette drive and insert the
NIC driver diskette 2.
13. Click Close in the Windows Welcome screen, and
then click Close again in the Network window.
14. If you are prompted, enter information about
your specific network.
See your system administrator for information.
15. Click Yes in the Network Settings Change win-
dow to restart your system.

Windows for Workgroups NIC

To connect your system to and configure it for use on an
Ethernet network, you must complete the following
steps:
1. Use the Program Diskette Maker (located in the
Dell Accessories program group) to make a dis-
kette copy of the NIC drivers installed on your
hard-disk drive.
2. Connect the network cable to the back of your
computer.
See "Network Cable Requirements" found earlier in
this chapter for detailed instructions.
3. Verify that the NIC is enabled in the System
Setup program.
See Chapter 2, "Using the System Setup Program,"
for more information.
4. Start the Windows for Workgroups operating
system.
5. In the Main program group, double-click the
Windows Setup icon.