Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MAER IDROPULITRICI ATOM XL
Summary of Contents for MAER IDROPULITRICI ATOM XL
- Page 1 High Pressure Cleaner ATOM XL Instructions Manual Instructions for installation and use Manufactured by: MAER IDROPULITRICI SRL Via Torre 65/2 24050 Torre Pallavicina BG Tel 0039 0363 996579 Fax 0039 0363 996688 maer@maeridropulitrici.com www.maeridropulitrici.com ITALIA...
-
Page 2: Table Of Contents
Contents 1. Field of employment 2. Characteristics of the personnel employed to use the cleaner 3. Accidents prevention 4. Characteristics of the high pressure cleaner 5. Instruments of the high pressure cleaner 6. Transport and unpacking 7. Installation 8. Connection to the electricity supply 9. -
Page 3: Field Of Employment
INSTRUCTIONS MANUAL INSTRUCTIONS FOR INSTALLATION AND USE Congratulations! By purchasing a MAER high pressure cleaner, you have purchased a high technology machine that will allow you to realize, for a long time, washing operations with care, versatility and safety. The customer and buyer must verify that the operators have read and know the content of the manual and that, therefore, attentively and meticulously follow all the indications. -
Page 4: Accidents Prevention
3.13. The maximum level of vibrations of the lance during the operation is 22m/sec 3.14. The high pressure cleaner ATOM XL can be provided with a timed total stop system. If the pistol remains closed for more than 10 sec, the motor will stop. The motor will start again by opening the pistol. -
Page 5: Instruments Of The High Pressure Cleaner
4. Characteristics of the high pressure cleaners The high pressure cleaners ATOM XL are divided in the following models: Model Maximum Maximum Installed Voltage Weight pressure Flow Power 50Hz (Kg-lb) (bar-psi) (l/min-gal/min) (KW) 120/11 120-1740 11-3 70-154 150/15 150-2175 15-4... -
Page 6: Installation
irresponsible persons. The same is worth for the objects used in the removal of the pack (knives, scissors.). For tied up demands to packing and transport, some components are supplied not installed; proceed therefore to the installation according to the instructions of the manual. 7. -
Page 7: Switching On
9.6.The water supply can have a maximum temperature of 60°C and a maximum pressure of 8 bar. The seals and other parts and components of the pump could be irremediably damaged when the machine is made to work without water, even for short periods. Verify that the tap of the water supply is completely open before the high pressure cleaner is switched on. -
Page 8: Demolition
II of the legislative decree 22/97. 14.3. ATTENTION: MAER IDROPULITRICI society does not assume any responsibility for damages to things, personal or animals, consequential and consequent to the re-use of the single parts or the single components of the machine for function or situation of the assemblage different from the original for which the high pressure cleaner has been conceived. -
Page 9: Warranty
17. Warranty 17.1 The High pressure cleaner has a twelve-month warranty from the date of delivery. Defects and vices connected or consequent to not compliance with the indications contained in this manual ARE EXCLUDED FROM THE WARRANTY. 17.2 MAC Guarantees the mechanical parts of the machine, under normal conditions of use and service; this warranty does not include accessories and usage materials. - Page 10 The machine you purchased is a technologically advanced product which uses a high pressure pump. The machine must be used by people with a specific education and competences on high pressure cleaners. To obtain more safety, read this booklet carefully and follow the instructions each time you use the machine.
- Page 11 1.2 SAFETY “MUSTS” 1.2.1. All electrical conductors MUST BE PROTECTED against the water jet. SHORT CIRCUIT HAZARD. 1.2.2. The machine MUST ONLY BE CONNECTED to an adequate power supply in compliance with all applicable regulations (IEC 60364-1). The machine may cause network noise during startup. Use of a safety residual current circuit-breaker (R.C.C.B.) will provide additional protection for the operator (30 mA).
-
Page 12: Declaration Of Conformity
- EN 292-1 / EN 292-2 / EN 60204-1 / EN 60335-2-79 / EN 60335-10 as described in the technical dossier, in the instructions manual for the use and the maintenance. The technical dossier is filed at MAER IDROPULITRICI SRL company. Torre Pallavicina,...