Dell Dimension 3100C Owner's Manual page 85

3 To replace the cover:
Align the bottom of the cover with the hinge tabs located along the bottom edge of the computer.
a
Using the hinge tabs as leverage, rotate the cover downward to close it.
b
Snap the cover into place by pulling back on the cover release latch and then releasing the latch
c
when the cover is properly seated.
Ensure that the cover is seated correctly before moving the computer.
d
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the
computer.
4 Connect your computer and devices to electrical outlets, and turn them on.
5 Ensure that the cover is seated correctly before setting the computer upright.
NOTICE:
To connect a network cable, first plug the cable into the network port or device, and then plug it into the
computer.
6 Connect your computer and devices to electrical outlets, and turn them on.
Removing and Installing Parts
85