Network Settings; Settings Menu; Ip Address; Bandwidth Profile - BT Videophone 1000 User Manual
British telecommunications (bt) user guide telephone bt videophone 1000
Hide thumbs
Also See for Videophone 1000:
- Quick setup and user manual (52 pages) ,
- User manual (48 pages) ,
- Quick start manual (17 pages)
Table of Contents
Advertisement
Videophone 1000 – Edition 3 – 26.05.06 – 7351
Network settings
IMPORTANT
You will not normally need to use these options unless advised to
change the settings by the Helpdesk.
Open the network settings menu.
1. Press MENU, scroll to
2. Scroll
to
IP Address
1. Open the Network Settings menu and press OK.
2. Press
OK
to select
to set Dynamic Address (DHCP)
Press OK. Dynamic Address (DHCP) is set.
to set Static Address
Scroll
to
IMPORTANT
If you set the IP address to Static Address, you will need to provide the
IP Address, Net Mask, Gateway Address and DNS Address.
Bandwidth profile
1. Open the Network Settings menu and press OK.
2. Scroll
to
3. Press
OK
to select
Low
Custom
or
SETTINGS
Network Settings
IP Address
.
Static Address
and press OK.
Bandwidth profile
High
or scroll
then press OK.
and press OK.
and press OK.
and press OK.
or
to
Medium
,
47
Advertisement
Table of Contents
