Software Upgrades; Automatic Checks; Check For Software Updates Manually; If The Software Download Fails - BT Videophone 1000 User Manual

Software upgrades

42

Automatic checks

Your BT Videophone 1000 will automatically check for software
updates on a regular basis.
When checking for updates the display shows Checking for new
updates. No user input is required.

Check for software updates manually

1. Press MENU, scroll
press OK.
2. Press OK
3. Scroll
4. Scroll
the check is completed.
5. Press Back
For information about upgrades and instructions on new
features, go to www.bt.com/broadbandtalk/video
Please note
If your BT Videophone 1000 is disconnected from the power supply it will
automatically check for new software upgrades within 2 hours of being connected
to mains power again.
If the download progress bar stops
If your BT Videophone 1000 experiences problems during the
software update, the download progress bar will stop. To reset
your phone, disconnect it from the mains power and the Ethernet
cable for a few seconds, then plug them in again. If there is a
connection problem, this will be shown on-screen.
Cancel upgrade
While downloading any upgrade, if you need to use the phone urgently, press
Cancel then Yes to confirm. The phone returns to standby
Videophone 1000 – Edition 3 – 26.05.06 – 7351
or
to select Phone Settings
Technical and press OK.
to
Check for Software Update
to
to return to standby.
or or to SETTINGS
.
. Press OK. Wait until
and