Karaoke; Clock And Timers - Panasonic SC-AKX710 Operating Instructions Manual

Karaoke

Preparation
Select the music source.
Note:
The Karaoke function is switched off when you switch off the
system or start recording.
Karaoke effect
You can use the Karaoke effect function to add the sound
effects.
1
Press [KARAOKE] repeatedly to select the effect.
VOCAL CANCEL Reduce the vocal level or change
the audio mode (depending on
the source).
ECHO Add an echo effect to the sound.
KEY CONTROL Change the key of a song.
Note:
The setting is cancelled when you
change to another source.
TEMPO
CD USB MEMORY
Change the speed of a song.
BGM Change the background music
level.
MIC EQ Select a MIC EQ mode.
OFF EFFECT Cancel the effect.
Press [OK] (main unit: [4/9]) to
confirm.
To check the current setting, press [OK].
2
Press [Y, U] to select the setting and then press
[OK].
Or turn [MULTI CONTROL] to select the setting.
VOCAL CANCEL "OFF", 1 to 3, "L", "R", "L+R"
When using stereo source not
formatted for Karaoke
It is recommended to use "2 VOCAL
CANCEL" for most songs.
When using Karaoke formatted
source
L: Only left channel sound
(accompaniment only)
R: Only right channel sound (vocals
only)
L+R: Left and right channel sounds
are mixed
ECHO "OFF", 1 to 4
KEY CONTROL –6 to +6
TEMPO "OFF", –2 to +2
BGM "OFF", 1 to 3
MIC EQ "SINGING" or "SPEECH"
Note:
To use the Karaoke effect in AUX source, set "AUX MODE" to
( 16)
"MODE 1" .
Karaoke jukebox
You can use the Karaoke effect while using Karaoke
jukebox.
Press [JUKEBOX] to select "ON KARAOKE JUKEBOX".
To cancel, select "OFF JUKEBOX".
Note:
•
The system switches to repeat mode automatically when
you switch on Karaoke jukebox.
•
Karaoke jukebox is switched off when you change to
another source.
█ Changing the repeat setting
1
Press [PLAY MENU].
2
Press [Y, U] to select the setting and then press
[OK].
Using the main unit
In the stop mode, turn [MULTI CONTROL] to select the
setting and then press [4/9].
RANDOM REPEAT
RND
ALL TITLE REPEAT
RANDOM MIX REPEAT
RND

Clock and timers

Setting the clock
This is a 24-hour clock.
1
Press [SETUP] to select "CLOCK".
2
Press [Y, U] to set the time and then press [OK].
To check the time
Press [SETUP] to select "CLOCK" and then press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] to select the setting (in minutes).
To cancel, select "OFF".
To check the remaining time
Press [SLEEP].
Note:
•
The remaining time is shown for a few seconds every
minute. "SLEEP 1" is always shown when only 1 minute
remains.
•
The sleep timer always comes first. Be sure not to set an
overlap of timers.
Repeat random playback.
Repeat all tracks.
Repeat random playback.
Sample sound is added to the
intervals of all tracks.
15
15