Turbocharger Attachment - ABB TPX Series Assembly Instructions Manual

Assembly Instructions / TPX44-H
4 Installing the turbocharger / 4.2 Turbocharger attachment
4.2

Turbocharger attachment

Requirements for threaded rods
Fig. 7: Requirements for threaded rods
Product Diameter Material Thread length Length of threaded
Threaded rod DIN / ISO 898 L1 [mm] rod
[mm] (Part 1) L2 [mm]
≥ 30
TPX44 Ø12 / M12 10.9 / 12.9 170
Table 6: Requirements for threaded rods
Fastening material, scope of delivery
The threaded rods and nuts required for attaching the turbocharger to the bracket are not
included in the ABB Turbo Systems scope of delivery. These parts depend on the version of
the engine-side bracket.
© Copyright 2019 ABB. All rights reserved. HZTL455311P0037_EN Rev.A November 2019