Table Of Contents - Beamz MHL 115 Instruction Manual

Table of contents

1. Before you begin
1.1 Packing list
1.2 Unpllcking instructions
1.3 AC Power
1.4 Safety instnJctions
2. Introduction
2.1 Features
2.2 DMX channel
3. Setup
3.1 Fuse replacement
3.2 Fixture linking
Data cabling
DMX data cable
3.3 3-Pin to 5-Pin conversion chart
3.4 Setting UP a DMX serial data link
3.5 Master/Slave fixture linking
3.6 Orientation
4. Operating instructions
4.1 Navigating the control panel
4.2 Menu map
4.3 User configurations
Setup single-desk lights autotocephaly moving mode{self-motion move)
Setup single-desk lights autotocephaly moving mode(sound control)
Master/slave mode (master sound, master auto)
To set the pan to invertion or non-inverting
To set the tilt to invertion or non-inverting
To set the LED readout to inverting or non-inverting
Resume reverter windows default
DMX mode
4.4 DMX channel values
5. Technical specifications
1. Before you begin
1.1 Packing list
Product name
Mini moving head Iight
Signal cable
Power lead
Manual
1.2 Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to
ensure that all parts are present, and have been received in good condition. Notify the
shipper immediately and retain packing material for inspection if any parts appear
damaged from shipping or the carton itself shoes sings of mishandling. Save the carton
and all packing materials. In the event that a fixture must be returned to the factory, it is
important that the fixture be returned in the original factory box and packing.
Qty
1
1
1
1