Table of Contents
Advertisement
en Troubleshooting
18
Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
18.1 Malfunctions
Fault
The appliance is not working.
Appliance is not heating; the
colon flashes in the display.
The appliance door cannot be
opened;
lights up in the dis-
play.
The appliance door cannot be
opened; lights up in the dis-
play.
The time flashes in the display.
The time does not appear in the
display when the appliance is
switched off.
lights up in the display and no
settings can be made on the ap-
pliance.
flashes in the display and the
appliance will not start.
appears in the display.
A message with appears in the
display, e.g.
-
.
22
Cause & Troubleshooting
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
Demo mode is activated.
Briefly disconnect the appliance from the power supply by switching the cir-
1.
cuit breaker in the fuse box off and back on again.
Deactivate demo mode within five minutes by changing the basic setting
2.
to .
→ "Basic settings", Page 14
The childproof lock locks the appliance door.
Use the button to deactivate the childproof lock.
▶
→ "Childproof lock", Page 14
The cleaning function locks the appliance door.
Allow the appliance to cool down until
▶
→ "Pyrolytic self-cleaning ", Page 17
There has been a power cut.
Reset the time.
▶
→ "Setting the time on the clock", Page 12
The basic setting has been changed.
Change the basic setting for the time display.
▶
→ "Basic settings", Page 14
Childproof lock is activated.
Use the button to deactivate the childproof lock.
▶
→ "Childproof lock", Page 14
The cooking compartment is too hot for the selected operation.
Switch off the appliance and allow it to cool down.
1.
Restart the operation.
2.
The maximum cooking time has been reached. To prevent an unwanted per-
manent operation, the appliance automatically stops heating after several hours
if the settings are unchanged.
Switch off the appliance.
▶
You can configure new settings if required.
Tip: To prevent the appliance from switching off when you do not want it to,
e.g. for an extremely long preparation time, set a cooking time.
→ "Time-setting options", Page 11
Electronics fault
Press the
button.
1.
If required, reset the time.
‒
a If the fault was a one-off, the error message disappears.
If the error message appears again, call the after-sales service. Quote the ex-
2.
act error message and the E no. of your appliance.
→ "Customer Service", Page 23
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
goes out in the display.
Advertisement
Table of Contents
