LG 32HL714S Owner's Manual page 40

Set ID Function
This function allows you to assign a unique ID to the monitor to control it remotely from your PC.
Please refer to the "Transmission/Reception Protocol".
1
Press the button and select [All Settings] [General] [RS-232C].
2
Set [RS-232C] to [On].
3
Use the , , , buttons to select [Set ID]. Then press the
4
Select a [Set ID] to assign. Then press the
5
In order to exit from the OSD Menu, press the LED Control Button
.
Communication Parameters
• Baud rate: 9600 bps (UART)
• Data length: 8 bits
• Parity bit: None
• Stop bit: 1 bit
• Communication code: ASCII code
• Crossed (reverse) cable used.
40
button.
button. The [Set ID] can be a value from 1 to 10.
or press
Command Reference List
Command
01. Power
02. Screen Mute
03. [Input List] (Main)
[Input List] (Sub)
[Input List] (Sub 2)
[Input List] (Sub 3)
04. [Aspect Ratio] (Main)
[Aspect Ratio] (Sub)
[Aspect Ratio] (Sub 2)
[Aspect Ratio] (Sub 3)
05. [PBP / PIP]
06. [PIP Size]
07. [Main/Sub Screen Change]
08. [Picture Mode]
09. [Brightness]
10. [Contrast]
11. [Sharpness]
12. [Brightness Stabilization]
13. [SUPER RESOLUTION+]
14. [Black Level]
15. [HDMI ULTRA HD Deep Color]
Data
Command1 Command2
(Hexadecimal)
k a 00 ~ 01
k d 00 ~ 01
x b 00 ~ FF
x c 00 ~ FF
x d 00 ~ FF
x e 00 ~ FF
x f 00 ~ 02
x g 00 ~ 01
x h 00 ~ 01
x i 00 ~ 01
k n 00 ~ 0C
k p 00 ~ 02
m a 01
d x 00 ~ 14
k h 00 ~ 64
k g 00 ~ 64
k k 00 ~ 64
m b 00 ~ 01
m c 00 ~ 03
m d 00 ~ 01
m e 00 ~ 01