LG 32HL714S Owner's Manual page 21

[Picture]
1
Press ( ) to activate the LED Control Button. When the LED Control Button is activated, press (
2
Among the LED Control Button, press
3
Configure the options following the instructions that appear in the bottom right corner.
4
To configure an upper menu or another item, press the LED Control Button
5
In order to exit from the OSD Menu, press the LED Control Button (
The applicable setting options are as shown below.
NOTE
• The [Picture Mode] that can be set depends on the Input signal.
[Picture Mode] on SDR (Non HDR) signal
[All Settings] > [Picture]
[Custom]
[Picture Mode]
[Vivid]
[HDR Effect]
[Mono]
[REC709]
[REC2020]
[DICOM]
[Calibration 1]
[Calibration 2]
NOTE
• [Calibration 2]: If you use Calibration after installing the
to move to the left or right or
or press
) or press .
Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Heightens contrast, brightness and sharpness to display vivid images.
Optimizes the screen for high dynamic range.
Mono (black and white) color mode.
Optimizes the screen for REC709.
Optimizes the screen for REC2020.
A mode that optimizes the screen settings so you can view images for medical use.
Configures to the last calibrated (corrected) screen.
Configures to a previously calibrated (corrected) screen.
program, the applicable menu will be activated.
) and select [All Settings] to show the complete OSD Menu.
to move to the bottom or top to go to the [Picture].
to move to the settings.
Explanation
21