,
1
•
Receives or transmits digital video signals.
•
Supported SDI(Serial Digital Interface signals) format is SMPTE 259M compliant (SD) / SMPTE
292M compliant (HD) / SMPTE 425M compliant (3G) / SMPTE ST 2081-10 (6G) / SMPTE ST 2082-10
(12G).
•
12G-SDI input transmission distance: 50 M max. (When using BELDEN1694A cable) / 70 M max.
(When using CANARE UHD 5.5C cable)
•
This model supports 12G-SDI video using SFP module.
•
Recommended SFP module types.
- Pluggable – SFP Type
- Standard – Video format SDI
- Host Pin configuration – Non-MSA
- Optical Fiber Number of Input – 1
- Optical Fiber Number of Output – 1
- Connector – LC Type
- Wavelength Receiver – 1270 nm ~ 1610 nm
- Wavelength Transmitter – 1310 nm
- Serial Data Rate(MAX) – 11.880 Mbps
- Vendor – Embrionix
Potential Equalization Conductor
2
•
Connect an equipotential plug.
3
•
Connect the RS-232C terminal with an external device to control the monitor.
10
,
4
•
Connect an AC/DC adapter.
5
•
Receives or transmits digital video signals.
•
Connect a up to 5-meter cable to transmit a duplicated screen to a monitor.
6
•
Input digital video signal.
•
Using a DVI to HDMI / DisplayPort to HDMI cable may cause compatibility issues.
•
Use a certified cable that displays the HDMI logo. The screen may not appear or a connection error
could occur if a non-certified cable is used.
•
Recommended HDMI cable types
- High speed HDMI
/™ cable
®
- High speed HDMI
®
/™ Ethernet cable
7
•
Receives or transmits digital video signals.
•
There may be no video output depending on the DisplayPort version of your PC.
•
A cable with DisplayPort 1.2 specifications is recommended when using a Mini DisplayPort to
DisplayPort cable.