Table of Contents
Advertisement
INTENDED USE:
This product is only to be used for inflating the Aqua Sports Water Park™. Household Use only.
WARNING:
1. Electrical current requirements:110-120VAC/60Hz
2. The power supply to the blower should include a reliable earth terminal and current
leakage protection device.
3. The power cord to the appliance should be clearly marked, so that persons using lawn
mowers or other types of equipment are aware that there is a cord on the ground.
4. The blower should never be left unattended when in use. The appliance is not to be used
by children.
5. No objects should cover the air intake when the blower is in use. Sand, small stones or
other objects should not be allowed to be sucked into the blower.
6. Under no circumstances should a finger or any sharp object be inserted into the air
intake.
7. The power supply to the blower should not be exchanged for any other type of supply. If
the power supply is damaged, it should be repaired by a technician.
8. To avoid the danger of electrical shock, do not use the blower in the rain.
9. Do not use extension cords as this would present an electrocution hazard.
10. Do not leave the blower exposed to strong sunlight.
11. Children should not touch the blower. Children must not play on the product until the
blower is properly installed.
12. Children should not attach foreign objects to the blower that are not specifically
designed for use with the blower, such as, but not limited to jump ropes, clothesline, pet
leashes, cables and chain as they may cause a strangulation hazard.
1.
1 x Inflatable Water Slide
2.
1 x Blower Motor
3.
1 x Water Spraying Hose Assembly
4.
3 x Blower Ground Stakes
5.
8 x Water Slide Ground Stakes + 1 Extra
6.
1 x Carrying bag
7.
1 x Inflatable Basketball
8.
1 x Inflatable Water Polo
9.
1 x Inflatable Volleyball
10. 1 x Volleyball Net
11. 4 x Repair Patches
BLOWER OPERATING INSTRUCTIONS
13. Sudden gusts of wind may lift the product off of the ground.
14. Blowers and electrical cords should be kept out of reach.
15. The product shall be inflated with blower provided or with other manufacturer specified
INSTALLATION:
1. Place the blower on the ground and then secure it by inserting the ground stakes into
2. The blower should be installed in a well-ventilated location and on a level surface.
3. The air input of the product (the long intake tube) is to be attached to the air output of
USING THE BLOWER:
1. Plug the blower into a power supply.
2. To avoid electrical shock, never plug in or
3. The power supply should be disconnected if
4. There is an ON/OFF switch on the blower
PART LIST
1
7
6
8
replacement blower.
the holes in the base.
the blower and secured in place with a cord.
unplug the appliance with wet hands.
the blower or the product needs to be
transported or moved.
body. Press " I " to switch on the blower,
and press "0" to switch off the blower.
2
3
9
4
5
10
11
90350 Banzai
7
Advertisement
Table of Contents
