Delfield SAR2-SLG Specifications

Specification Line
Self-Contained Sliding Door Reach-In Refrigerator
MODELS
❑ SSR2-SLS
2 section stainless interior
sliding solid full height doors
❑ SSR2-SLSH
2 section stainless interior
sliding solid half height doors
❑ SSR2-SLG 2 section stainless interior
sliding glass full height doors
❑ SSR2-SLGH 2 section stainless interior
sliding glass half height doors
SSR2-SLG
SPECIFICATIONS
Exterior: Cabinet exterior sides, front and shroud
shall be 22-gauge, corrosion resistant stainless steel.
Upper shroud shall be hinged, with stay-open feature
to provide easy access to refrigeration system.
Interior: Cabinet interior shall be 22-gauge, corrosion
resistant stainless steel (SS models) or heavy gauge
aluminum (SA models). Bottom and top surfaces are
die stamped to provide radius corners and recessed
floor. Three chrome plated wire shelves are provided
per section. Shelves rest on clips which are adjustable
in 1" increments on stainless steel pilasters affixed to
the cabinet interior. Pilasters are removable without
tools for cleaning. An air duct is mounted to the
ceiling assuring low velocity, even air movement
throughout the cabinet interior.
❑ SAR2-SLS
❑ SAR2-SLSH
❑ SAR2-SLG
❑ SAR2-SLGH
STANDARD FEATURES
• Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Exterior digital thermometer
• Easy to use electronic control
• Three chrome plated wire shelves per section
• 10' attached cord and plug standard on 115V units
• 6" adjustable stainless steel legs
• Energy savings door heater switch
• Flourescent lights with on/off switch
(Glass door units only)
• Two year parts & labor warranty
Doors:
Solid Sliding. Exterior and interior shall be 22-gauge
corrosion resistant stainless steel.
Glass Sliding. Double thermopane glass set in high impact
black plastic frame.
Doors are set in tracks for easy movement. Spring action
assures self closing. Gasket seals both ends of doors. Doors
are removable for cleaning.
Refrigeration system: All components are mounted to
the exterior cabinet ceiling, outside the food zone and are
assembled as one piece and can be removed as one piece.
Environmentally friendly R404A refrigerant is used. System
has the capability of maintaining between 27˚F and 40˚F in
heavy use food service operations. Refrigerant is metered
using a highly responsive thermostatic expansion valve.
980 S. Isabella Road Phone: 800-733-8948
Mt. Pleasant, MI 48858 Fax: 800-669-0619
www.delfield.com Email: info@delfield.com
Project __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
2 section aluminum interior
sliding solid full height doors
2 section aluminum interior
sliding solid half height doors
2 section aluminum interior
sliding glass full height doors
2 section aluminum interior
sliding glass half height doors
OPTIONS AND ACCESSORIES
❑ Additional shelves
❑ Tray slides
❑ Stainless steel back
❑ Laminate on front, sides and back
❑ Bottom mount electrical
❑ Stainless steel banking strip
❑ Heat shield end
❑ Stainless steel kick plate
❑ Laminate kick plate
❑ 4" stainless steel utility base
❑ Alarm control display
❑ 220-50-1 electrical
❑ 220-60-1 electrical
❑ Security package
System is controlled using Delfield's ACT-Advanced
Control Technology electronic temperature control, which
provides improved pull down times, reducing compressor
cycling and longer compressor life with lower energy
consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V,
60Hz, single phase. A 10' cord and plug is supplied
attached to a junction box mounted on the exterior top
of the cabinet.
Approval _________________
Date____________________