Connecting The Appliance; Setting The Temperature - Siemens KD7 N Series Operating Instructions Manual

en
Connecting the
appliance
After installing the appliance, wait at least
½
hour before switching on the appliance.
During transportation the oil in the
compressor may have flowed into the
refrigeration system.
Before switching on the appliance for the first
time, clean the interior (see Cleaning).
The socket should be freely accessible.
Connect the appliance to a 220–240 V/50 Hz
ac current via a plug which has been properly
installed. The socket must be fused with
a 10 A to 16 A fuse or higher.
For appliances operated in non-European
countries, the identification plate should
be checked whether the electric supply
and the current model stated match the
vales of the mains supply. The rating plate
is situated in the bottom left-hand side of
the appliance. Any necessary exchanging
of the mains lead should carried out by
a specialist electrician.
m
t~êåáåÖ>
Never connect the appliance to electronic
energy saver plugs (e.g. Ecoboy, Sava
Plug) or to power inverters which convert
the direct current to 230 V alternating
current (e.g. solar equipment, power
supplies on ships).
18
Setting the
temperature
This refrigerator features a temperature
controller for the freezer compartment and
a temperature controller button for the
refrigerator compartment.
Controls for the
refrigerator compartment
3
Fig.
Temperature controller –
"temperatur °C"
The factory setting of the temperature
controller for the refrigerator compartment
is 4 °C.
The cooling temperature can be set by
pressing button temperatur °C.
Each time this button is pressed, the display
advances 1 °step at a time (1–7 °C).
Super cooling button –
"super cool"
Function for rapid cooling of food which are
to be stored in the refrigerator.
Press the super cool button. Each time the
button is pressed, the function is activated
or deactivated.
If the button super cool is not pressed within
a specific time after fast cooling mode was
activated, this mode is automatically
deactivated.