Zanussi ZWT 3206 User Manual page 10

Table of Contents

Advertisement

Available languages

Available languages

OPTIONS
TEMPERATURE
With this option you can change the default
temperature.
Indicator
= cold water.
The indicator of the set temperature comes on.
SPIN
With this option you can change the default spin
speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
Set this option to deactivate all spin phases.
Only the drain phase is available.
The related indicator comes on.
Set this option for very delicate fabrics.
The rinses phase uses more water for some
washing programmes.
Rinse Hold
Set this option to prevent the laundry creases.
The related indicator comes on.
There is a water in the drum when the
programme is completed.
The drum turns regularly to prevent the laundry
creases.
The lid stays locked. You must drain the water
to unlock the lid.
To drain the water refer to 'At the end
of the programme'.
KURZ/ RAPIDE
With this option you can decrease the programme
duration.
Use this option for items with light soil or items to
refresh.
The related indicator comes on.
VORWÄSCHE/ PRÉLAVAGE
With this option you can add a prewash phase to a
washing programme.
Use this option for heavy soil.
When you set this option the programme duration
increases.
1) See in "Settings" how to activate this option.
10
The related indicator comes on.
BÜGELQUICK/ ANTI-FROISSAGE
The appliance carefully washes and spins the
laundry to prevent the creases.
The appliance decreases the spin speed, uses
more water and adapts the programme duration to
the type of laundry.
The related indicator comes on.
SPÜLEN/ RINÇAGE
With this option you can perform only a last rinse of
a selected washing programme.
If you set also the Extra Rinse function (
appliance adds two or more rinses.
The related indicator comes on.
PUMPEN/ VIDANGE SCHLEUDERN/
ESSORAGE
With this option you can perform the spin and drain
cycle.
The spin phase is suitable to the washing
programme you set.
If you set also the No Spin (
option, the appliance only drains.
FERTIG IN/ FINI DANS
With this option you can set the number of hours in
which you would like your washing programme to
be completed.
You can set from minimum 3 hours to maximum 20
hours.
The display shows the number of hours and the
indicator above the button
EXTRA SPÜLEN / RINÇAGE PLUS
With this option you can add some rinses to a
washing programme.
Use this option for persons allergic to detergents
and in areas where the water is soft.
The related indicator comes on.
) the
)
is on.
1)

Advertisement

Table of Contents
loading

Table of Contents