Advertisement
Quick Links
0108L00-
0108C00-
0108L00WP- ANTIQUE WALNUT
0108C00WP-
This instruction booklet containes
IMPORTANT safety information.
Please read and keep for future reference.
DATE OF PURCHASE:
MODEL #:
ANTIQUE WALNUT
WHITE
WHITE
NOTE:
CAPRI SINGLE CRIB
RECEIPT OF PURCHASE:
ATTACH HERE
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace
the part FREE of charge.
NEED HELP!
Tel #: 1-800-295-1980
CALL US FOR ASSISTANCE
E-Mail: das@dorel.com
Fax #: 514-353-7819
1-800-295-1980
DO NOT RETURN PRODUC
E-MAIL:DAS@DOREL.COM
Advertisement
Related Manuals for Jardine CAPRI 0108L00
Summary of Contents for Jardine CAPRI 0108L00
- Page 1 CAPRI SINGLE CRIB MODEL #: 0108L00- ANTIQUE WALNUT 0108C00- WHITE 0108L00WP- ANTIQUE WALNUT 0108C00WP- WHITE RECEIPT OF PURCHASE: NOTE: This instruction booklet containes IMPORTANT safety information. Please read and keep for future reference. ATTACH HERE DATE OF PURCHASE: DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department.
- Page 2 CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part.
-
Page 3: Care And Cleaning
Check bolts/screws periodically and tighten them if necessary. LIMITED WARRANTY Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase. -
Page 4: Hardware List
CAPRI SINGLE CRIB HARDWARE LIST BOLT 2"x1/4"DIA. 2 PCS BOLT 3-1/4"x1/4"DIA. 4 PCS BOLT 1/2"×1/4"DIA. 16 PCS ALLEN WRENCH 4MM 1 PC RUBBER BUMPER 2 PCS MACHINE SCREW 3/8"×3/16" DIA. 2 PCS PARTS LIST LEFT END PANEL 1 PC RIGHT END PANEL 1 PC STATIONARY SIDE 1 PC DROP SIDE 1 PC STABILIZING BAR 1 PC... - Page 5 CAPRI SINGLE CRIB NOTE: When inserting bolts, turn clockwise until tight, then loosen 1/2 of a turn. After crib is completely assembled, return to each bolt and tighten. Use wax or soap on all bolts to facilitate assembly. STEP 1 Attach left end panel (A1) and right end panel (A2) to stationary side (B) with bolts (1).
- Page 6 CAPRI SINGLE CRIB STEP 3: Attach the mattress support to the 4 corner posts with the mattress support bolts (4). Use Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the mattress support.
- Page 7 CAPRI SINGLE CRIB STEP 4 ALIGN AND SLIDE DROP SIDE FROM THE BOTTOM ONTO THE DROP SIDE UPPER AND LOWER TRACKS ON THE LEFT AND RIGHT FRONT POSTS. MAKE SURE THE RELEASE LATCH ON THE LOWER GUIDES IS TO THE OUTSIDE OF THE LOWER DROP SIDE TRACKS (PULL TOWARDS YOU).