Download Print this page

Advertisement

Quick Links

MODEL # DA616BC (DARK PINE) / DA616BN (NATURAL)
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color
and a detailed description of the part.
*
Failure to follow these warnings and assembly instructions could result in serious injury or death.
*
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
*
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts and
instructional literature if needed. DO NOT substitute parts.
*
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be
*
used.
*
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
*
*
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
*
loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
*
*
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
*
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
*
Replace teething rail if damaged or loose (if teething rail is provided for this model).
*
*
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
*
*
Follow warnings on all products in a crib.
WARNING ENTRAPMENT / STRANGULATION HAZARD:
* Infants have died in toddler beds from entrapment and strangulation.
* NEVER use bed with children under 15 months.
* NEVER place bed near windows where cords from blinds or drapes may strangle a child.
*
The TODDLER BED or DAY BED is not intended for children under 15 months of age or over 50
*
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid
the formation of a gap between the mattress and the bed that could cause an entrapment (when
product is used as a TODDLER BED or DAY BED).
*
DO NOT place DAY BED or TODDLER BED near windows where cords from blinds or drapes may
strangle a child.
*
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or
pacifier cords.
*
DO NOT suspend strings over a TODDLER BED or DAY BED for any reason.
CUSTOMER SERVICE
CALL 1-800-295-1980
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: csr@jardcoent.com
WARNING

Advertisement

loading

Summary of Contents for Jardine DA616BC

  • Page 1 MODEL # DA616BC (DARK PINE) / DA616BN (NATURAL) CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part.
  • Page 2: Care And Cleaning

    Check bolts/screws periodically and tighten them if necessary. LIMITED WARRANTY Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase.
  • Page 3: Parts List

    ASSEMBLY INSTRUCTION FOR DA616BC & DA616BN PARTS LIST LONG BOLT 4 1/4"×1/4" DIA 6PCS ALLEN WRENCH 4MM 1PC 4PCS 2PCS 1/2"×1/4"DIA SHORT BOLT 3"×1/4" DIA 2PCS RUBBER BUMPER MATTRESS SUPPORT BOLT 0.3805"×0.1785"DIA 1/2"×14MM SHORT BOLT 2"×1/4" DIA 2PCS MINIFIT HOUSING MACHINE SCREW 2PCS 35×7MM...
  • Page 4 ASSEMBLY INSTRUCTION DA616BC & DA616BN CRIB WITH DRAWER Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts, which may have some loose inside the carton during shipment. Identify and count all part sent compare with the parts list.
  • Page 5 ASSEMBLY INSTRUCTION DA616BC & DA616BN CRIB WITH DRAWER STEP 2 Attach the mattress support to the 4 corner posts with the mattress support bolts (D). Use Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the mattress support.
  • Page 6 ASSEMBLY INSTRUCTION DA616BC & DA616BN CRIB WITH DRAWER STEP 3 ALIGN AND SLIDE DROP SIDE FROM THE BOTTOM ONTO THE DROP SIDE UPPER AND LOWER TRACKS ON THE LEFT AND RIGHT FRONT POSTS. MAKE SURE THE RELEASE LATCH ON THE LOWER GUIDES IS TO THE OUTSIDE OF THE LOWER DROP SIDE TRACKS (PULL TOWARDS YOU).
  • Page 7 ASSEMBLY INSTRUCTIONS FOR DA616BC / DA616BN TRUNDLE DRAWER DIAGRAM 1 Step 4: Inserting screw (part J ) into the nylon nuts on drawer sides (A1&A2) and front (B) by rotating it clockwise. Step 5 Inserting (G) into the pre-drilled DIAGRAM 2 holes of drawer back (E).
  • Page 8 ASSEMBLY INSTRUCTION DA616BC & DA616BN CRIB WITH DRAWER STEP 9 CAREFULLY LAY THE CRIB DOWN ON A FLAT, SMOOTH SURFACE (CLEAN CLOTH OR CARPET) WITH DROPSIDE FACE UP. INSERT DRAWER INTO THE TRACKS FROM TOP (FOR EASE OF INSTALLATION WE RECOMMEND TWO PEOPLE INSTALL TRUNDLE DRAWER INTO TRACKS) AND LET IT SLIDE DOWN INTO THE CRIB.
  • Page 9: Starting From Scratch

    DAY BED WARNINGS: 1. ANY MATTRESS USED IN THIS DAY BED MUST BE AT LEAST 27-1/4" × 51-5/8" (69CM × 131CM) WITH A MINIMUM THICKNESS OF 4" AND NOT EXCEEDING 6" (15CM). 2. THE DAY BED IS INTENDED FOR USE BY A CHILD NOT LESS THAN 15 MONTHS OF AGE AND WHO WEIGHTS NO MORE THAN 50LBS (27.7KGS) NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT, THEN LOOSEN 1/2-3/4 OF A TURN, AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH...

This manual is also suitable for:

Da616bn