Download Print this page

Jardine Madison DA833BC Manual

Single crib (natural)

Advertisement

Quick Links

If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color
and a detailed description of the part.
*
Failure to follow these warnings and assembly instructions could result in serious injury or death.
*
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
*
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or
sharp edges, DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our
customer service representative (address & phone number shown above) for replacement parts and
instructional literature if needed. DO NOT substitute parts.
*
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
*
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be
used.
*
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
*
*
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
*
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.
If refinishing, use a non-toxic finish specified for children's products.
*
*
When child is able to pull to standing position, set mattress to lowest position and remove bumper
pads, large toys and other objects that could serve as steps for climbing out.
*
Never use plastic shipping bags or other plastic film as mattress covers because they can cause
suffocation.
DO NOT use a water mattress with this crib.
*
Replace teething rail if damaged or loose (if teething rail is provided for this model).
*
*
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8
INCHES (69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT
EXCEEDING 6 INCHES (15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
*
Follow warnings on all products in a crib.
*
*
Ensure all parts and components are present before beginning assembly.
*
Assemble on soft, smooth surface to prevent damage to product finish.
*
Phillips head screw driver is not included.
*
DO NOT use power tools.
*
CAUTION: Adult assembly required.
*
Assembly will require two people.
Model # DA833BC- Madison Single Crib (Natural)
CUSTOMER SERVICE
CALL 1-800-295-1980
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: csr@jardcoent.com
WARNING
NOTES

Advertisement

loading

Summary of Contents for Jardine Madison DA833BC

  • Page 1 Model # DA833BC- Madison Single Crib (Natural) CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! CALL 1-800-295-1980 You can also order parts by writing to the address listed below. Please include the product model number, color and a detailed description of the part.
  • Page 2: Care And Cleaning

    Check bolts/screws periodically and tighten them if necessary. LIMITED WARRANTY Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers 1 year from the date of original purchase.
  • Page 3 ASSEMBLY INSTRUCTIONS FOR "DA833BC" HARDWARE AND PART LIST BOLT 5"×1/4"DIA 2PCS BOLT 3 1/4"×1/4"DIA 2PCS ALLEN WRENCH 4MM 1PC BOLT 2"×1/4"DIA 10PCS 1/2"×1/4"DIA 0.3805"×0.1785"DIA MACHINE SCREW 2PCS MATTRESS SUPPORT BOLT 16PCS LEFT END PANEL 1PC RUBBER BUMPER 2PCS STABILIZING BAR 1PC RIGHT END 1PC LEFT END 1PC STATIONARY SIDE 1PC...
  • Page 4 Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below. NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT.
  • Page 5 STEP 3: Attach stationary side(J) to left and right back post (L1 and L2), using bolts (A) and (B). Use Allen wrench (D) to tighten bolts. NOTE: WHEN INSTALLING THE STATIONARY SIDE AND DROP SIDE, PLEASE ENSURE THE TEETHING RAIL IS ON TOP. STEP 4: Attach stabilizing bar (H) to end panels (I1) and (I2), using bolts(C).
  • Page 6 STEP 5: Attach the mattress support to the 4 corner posts with the mattress support bolts (E). Use Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the mattress support. INCORRECT- Raised edge should face down -this...
  • Page 7 STEP 6 ALIGN AND SLIDE DROP SIDE FROM THE BOTTOM ONTO THE DROP SIDE UPPER AND LOWER TRACKS ON THE LEFT AND RIGHT FRONT POSTS. MAKE SURE THE RELEASE LATCH ON THE LOWER GUIDES IS TO THE OUTSIDE OF THE LOWER DROP SIDE TRACKS (PULL TOWARDS YOU). RAISE DROPSIDE UNTIL IT IS LOCKED INTO PLACE. CAUTION: DO NOT FORCE THE DROP SIDE AS YOU MAY BREAK THE LOCKS, GUIDES, OR TRACKS.