Table Of Contents - Well Tempered Lab Amadeus 254 Instruction Manual

Preliminary
The Well Tempered Lab Amadeus 254 / 254 GT turntable is a William Firebaugh designed turntable, predominately
conceived for use with the Well Tempered Lab LTD Tonearm.
The Amadeus 254 range of turntables feature a unique 2 piece plinth construction with squash ball isolation.
The Amadeus 254 GT has an aluminium top and bottom layer plinth whilst the Amadeus 254 features Bamboo. Both have
multilayer plywood included in the plinth design.
Before embarking on the relatively simple process of assembling the Amadeus 254 / 254 GT, please take the time to fully
read these instructions and follow the steps within. The old adage of "if all else fails read the instruction manual" needs to
be applied from the onset. Well Tempered Lab cannot be held responsible for consequences resulting from the failure to
comprehend these instructions. If in doubt always consult with your dealer.
Well Tempered Lab's policy is the continuous improvements of its products. We therefore reserve the right of departure
from illustration or specification that this might occasion.
Contents
Unpacking the Amadeus 254 / 254 GT
Assembly
Installing the Platter
Speed Control
Installing the Belt
Rear Panel
Making a Belt
Troubleshooting
Tonearm Alignment Guide for Well Tempered Lab Turntables
Specifications
Warranty and Service
European Waste and Electrical and Electronic Directive
Registration
2
Pg 3
Pg 3
Pg 3 - 4
Pg 4
Pg 4
Pg 5
Pg 6
Pg 7
Pg 8
Pg 9
Pg 10
Pg 10
Pg 10