Before Each Use; Operating Instructions - Klutch 62240 Owner's Manual


Ensure that the reel is properly installed before connecting input and output hoses.

Before connecting a pressure source, ensure that the supply pressure does not exceed maximum
working pressure rating of reel.

Inspect the hose reel fittings, alignment, hoses, and components periodically before use.

Wear ANSI Z87.1 compliant safety goggles or safety glasses with side shields when assembling
and using the hose reel.

Do not exceed the max working pressure of 300 PSI.

Never attach any tool or accessory to the hose unless it is capable of safely operating at a
pressure greater than the supply pressure.

If a leak occurs in the hose or reel, remove system pressure immediately.

If reel ceases to unwind or rewind, remove system pressure immediately.

Do not kink the hose. Do not step on the hose or drive or drag objects over the hose. Do not place
any objects on the hose or hose reel.

Pull the hose from the reel by grasping the hose itself, not the valve.

Use soap and water when checking for air leaks. Exposure of skin directly to pressurized air or
fluids could result in severe bodily injury. Remember, even low pressure is very dangerous and
can cause personal injury or death.

Avoid accidentally releasing the reel's latching mechanism. The hose reel is under tension and
accidental release can cause a wildly spinning reel and personal injury.

If necessary, adjust the spring tension on the reel by adding or removing wraps of hose from the

Before Each Use

⚠WARNING

Operating Instructions

⚠WARNING
Page 8 of 14