Table of Contents
Advertisement
en Intelligent dosing system
can manually add detergent.
→ "Adding detergent and care
product", Page 43
Filling the dispenser
Note
In order to use intelligent dosing, fill the
dispenser.
¡ Fill the dispenser only with suitable
"detergent and care products"
→ Page 40.
¡ If you change the liquid detergent
or fabric softener, empty and clean
the dispenser beforehand.
→ "Cleaning the detergent drawer",
Page 53
¡ If you want to use both dispensers
for liquid detergent, adjust the
"contents of the dispenser"
→ Page 46.
Requirement: /
Pull out the detergent drawer.
1.
Open the dispenser lid.
2.
Pour liquid detergent
3.
softener
into the relevant dis-
pensers.
→ "Detergent drawer", Page 21
46
flashes.
and fabric
Close the dispenser lid.
4.
Note: To prevent the detergent
from drying out or drying up, do
not leave the dispenser lid open
for a long period of time.
Push in the detergent drawer.
5.
Adjust the "basic dosage"
6.
→ Page 47.
Dispenser contents
When it leaves the factory, the dis-
penser is set
Alternatively, you can also use this
dispenser
for a second liquid de-
tergent .
Notes
¡ If you change the content of the
dispenser, the basic dosage for
this dispenser is reset.
¡ If you use both dispensers for li-
quid detergent, you must select a
dispenser which is to be used dur-
ing washing.
You can change dispenser contents
in the basic settings.
→ "Changing the basic settings",
Page 52
for fabric softener
.
Advertisement
Table of Contents
