DAVIS WindScribe Instructions

Davis WindScribe™ ultrasonic wind meter is portable, rugged,
with no moving parts. Provides wind sped, temperature, wind
chill. Uses patented ultrasound technology to read current
wind speed from 0.4 to 150 mph, highest positive speed
(headwind), lowest negative speed (tailwind), 5-second aver-
age, and running average. Select from mph, km/h, fpm, m/s,
f/s, or knots. Choose temperature and wind chill in °F or °C, in
tenths of a degree.
Includes 3-volt lithium battery, adjustable wrist lanyard, mount-
ing bracket with 6" (15 cm) Velcro
Use three ways:
• Handheld
• Tripod mount
• Mounting bracket
Tripod thread (1/4" x 20).
Also used for mounting
bracket.
Wrist lanyard, adjustable
and removable.
Getting Started
1. Install Battery. Use coin to open battery door.
Install battery positive (+) side up. Replace battery
when low battery indicator is displayed.
INSTRUCTIONS
® strap.
Ultrasonic wind barrel
with ultrasonic sensors
and advanced micro-
processor circuitry.
Ultrasonic
Wind Meter
Metric and U.S.
units of measure
Patented
Telltale slot so you'll
know when the unit is
pointed directly into the
wind. Tie a piece of yarn
or string (not included)
to telltale slot.
Quick Reference Guide.
Replaceable battery. Up to
600 hours of use, with auto-off
and low battery indicator.
2. Attach Mounting Bracket. Attach mounting bracket
to tripod thread.
#276