Table of Contents
Advertisement
In the Configuration file (URL) field enter the following:
http:// followed by Hostname or IP Address, followed then by /prov/%MACD.
Example for Hostname using HTTP:
http://abc.bicomsystems.com/prov/%MACD
Example for IP Address using HTTP: http://192.168.1.10/prov/%MACD
Click Set button.
Click on Reboot in the left navigation menu.
Click OK button in Reboot section and confirm with OK.
You'll have to wait couple of seconds for the configuration to be updated.
off your phone.
Auto provisioning process will start during phone reboot process, phone will pickup
appropriate configuration file from PBXware. If everything is done as above described, you
should have successfully registered your phone to PBXware. Dial *123 to verify registration.
Retrieved from "http://wiki.bicomsystems.com/Gigaset_N510"
Disclaimers - About Bicom Systems Wiki
NOTE:
Do not power
Advertisement
Table of Contents
