Page 1
Bellafina 9 Piece Fire Pit Set Square Fire Pit Dining Table ASSEMBLY / CARE & USE INSTRUCTIONS IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY If you have any questions or any missing parts pertaining to the assembly of this product, before returning if to your retailer, please contact our customer service department at 1-888-690-9800 or email CS@SUNVILLAHOME.COM, 5:00 a.m.
Page 2
Parts & Tools Assembly 4 - 6 Important Safety And Service Information 7 - 13 Page 2 of 13...
Aluminium Square Fire Pit Table Parts & Tools Item# FTA10415 Part List Hardware List M6*22 Bolt Fire Pit Table Top Φ8.4*24*2 Flat Washer Fire Pit Table Base Wrench Cover Battery(Not included) LP Propane Tank (Not included with product) Propane Hose with Reguator Bag of Decorative Glass WARNING: To avoid damage of your new patio furniture, please use either...
Page 4
Step 1: Line up the bolt holes on the fire pit table top (A) with the corresponding bolt holes on the fire pit table base (B). Screw the M6*22 bolts (AA) with flat washers (BB) using the wrench (CC). Now tighten all the bolts as shown. ASSEMBLE ON A FLAT SOFT SURFACE SO YOU DON’T SCRATCH OR DAMAGE THE TABLE TOP.
Page 5
Step 4: Open the door on the fire pit table (B) and securely tighten the regulator (E) to the LP propane tank valve (D) by rotating clockwise, hand-tighten only. Do not use a wrench to tighten! Use of a wrench may damage the quick closing nut and result in hazardous condition.
Page 6
Step 7: Close the propane tank valve after use by rotating clockwise. Make sure the knob valve is shut completely off o i t Step 8: Wait until the decorative glass cools down before placing the cover (C) over the burner and onto the fire pit table top. Step 9: Storage of the fire pit table indoors is permissible only if the propane tank is disconnected and...
Need help?
Do you have a question about the Bellafina and is the answer not in the manual?
Questions and answers