Bajaj Avenger 160 Street BS VI Owner's Manual page 14

Control Switch - RH
E. Starter Button : It operates the electric
starter. It is recommended to start the
engine with the transmission in neutral.
Vehicle in Gear - Press clutch lever &
operate starter button to start the engine.
F. Engine Kill Switch : It is used for
switching ON (
G. Light Switch : It has 2 positions. When
igntion switch is 'ON', lighting system will
work as per given table.
Switch Position Function
Ignition ON DRL high intensity and Tail lamp
+ Engine ON+Light ON
Switch OFF
Ignition ON+ DRL low Intensity, Head lamp ON
Engine ON+Light Tail lamp and number plate ON ,
Switch ON Speedometer illumination ON
F
G
E
) & OFF ( ) engine.
Day Time Running Light :
• Day Time Running light is provided inside
headlamp.
• Day Time running light gets 'ON' (High intensity)
when ignition switch turned to 'ON' position.
• After headlight is turned to 'ON' position, intensity
of DRL LED's will get reduced.
Note: The inside of the lamp lens might fog up after using
the motorcycle in rain or after washing. Fog inside the
lamp lens will disappear gradually by switching on the
lamp while driving the motorcycle. The amount of time it
takes for the fog to disperse depends on the humidity of
the ambient air. Fog in non functional areas other than
reflector does not affect the lamp performance.
10